This SlideShowPro photo gallery requires the Flash Player plugin and a web browser with JavaScript enabled.

Videos & Pictures

Video: In the CorvetteBlogger.com Garage – V1.1

by Keith Cornett on January 5, 2008

I’ve been debating doing a video blog post for sometime now and decided that with the recent events, now was as good as time as any. This first attempt is pretty rough I’ll admit and it remains to be seen how well it will be received. Please leave a comment with your thoughts, comments and suggestions.

Contents of Episode V1.1 include:

  • A new feature is spied and a missing badge on the Corvette ZR1.
  • A rant against the signature Indy 500 Pace Car
  • A preview of things to come for the 2009 Corvette
  • Noland Adams book is back!

Related:
2009 Corvette ZR1 Photo Gallery
Two Unique Corvettes to Pace the 2008 Indianapolis 500
CorvetteConti.com’s 2009 Corvette Previews
Five People in the Corvette Hobby I’d Like to Meet

Credits:
music.podshow.com

Technorati Tags:
| | | | | | |

I’m betting that Corvette Product Manager Harlan Charles is a very popular fellow now that the details about the Corvette ZR1 have been released. We saw him recently on the Garage419.com vblog as he stood next to and pointed out features of the new King of the Hill. Following his turn is some GM corporate footage of the 2009 Corvette ZR1.


Source:
Garage419.com

Related:
The New King of the Hill: The 2009 Corvette ZR1
2009 Corvette ZR1 Photo Gallery
First 2009 Corvette ZR1 Heading to Barrett-Jackson

Technorati Tags:
| | |

Video: Unveiling the 2008 Indy 500 Corvette Pace Cars

by Keith Cornett on December 29, 2007

On December 27th, Chevrolet and the Indianapolis Motor Speedway raised the curtain on two unique 2008 Corvettes that will serve as pace cars for the 92nd Indianapolis 500. The event was held in downtown Indianapolis at the RCA dome. Click the video to watch the unveiling as it happened, as well as listen to the various dignitaries pontificate about the Corvette and its involvement with the greatest spectacle in racing, the Indianapolis 500.

2008 Corvette Indy 500 Pace Car Unveiling


Sources:
Indianapolis 500

Related:
Two Unique Corvettes to Pace the 2008 Indianapolis 500
Corvette’s 2008 Indy Pace Car Unveiling Date Set
Flashback: Corvette Convertible to Pace Indianapolis 500

Technorati Tags:
| | | | | | |

The New King of the Hill: The 2009 Corvette ZR1

by Keith Cornett on December 20, 2007

It’s 12:01 on December 20, 2007 and the curtain has been raised on a new Corvette model. The 2009 Corvette ZR1 has crossed over from rumor to reality. It’s obvious from the first photos that this isn’t your father’s ZR1. We’re talking 620 horses delivered via the supercharged 6.2 liter LS9. A bit lower than the lofty 650 that was speculated, but that is still 115 hp more than the performance-minded Corvette Z06. So here we go, fellas! Sit down, shut up and hang on because we are going to be throwing a whole bunch of Corvette info at you:

Corvette ZR1 Talking Points:

  • The 2009 Corvette ZR1 is RPO 1LZ
  • The ZR1 will have a unique, identifying VIN digit, as well as a sequential build number
  • LS9 supercharged 6.2L V-8 targeted at 620 horsepower and 595 lb.-ft. of torque
  • Curb weight of 3,350 pounds
  • Unique Carbon-fiber hood with a polycarbonate window
  • Carbon fiber roof panel
  • Unique exterior and interior colors
  • Only two options: chrome wheels and a “luxury” package
AND

Jake, that bad boy skull logo of Corvette Racing has been embossed on the ZR1′s intake snorkel, forever cementing his racing roots on a production Corvette. Unbeliveable!!

     

View the 2009 Corvette ZR1 Photo Gallery.

PRESS RELEASE

CHEVROLET ENTERS THE WORLD OF SUPERCARS WITH 2009 CORVETTE ZR1
New, Supercharged LS9 V-8 is the Heart of the ZR1

DETROIT – Chevrolet officially announced the 2009 Corvette ZR1 – an American supercar that brings the technology and engineering refinement of carbon-fiber, ceramics and electronics together in a distinctive design.

“Chevrolet’s goal with the new ZR1 is to show what an American supercar can deliver, at a price that trumps exotics that cost two, three or four times as much – and does so with exceptional driveability,” said Ed Peper, Chevrolet general manager.

The ZR1′s basic stats:

  • All-new LS9 supercharged 6.2L V-8 targeted at producing at least 100 horsepower per liter, or 620 horsepower (462 kW), and approximately 595 lb.-ft. of torque (823 Nm)
  • Six-speed, close-ratio, race-hardened manual transmission
  • New, high-capacity dual-disc clutch
  • Higher-capacity and specific-diameter axle half-shafts; enhanced torque tube
  • Specific suspension tuning provides more than 1g cornering grip
  • Twenty-spoke 19-inch front and 20-inch rear wheels
  • Michelin Pilot Sport 2 tires – P285/30ZR19 in front and P335/25ZR20 in the rear – developed specifically for the ZR1
  • Standard carbon-ceramic, drilled disc brake rotors – 15.5-inch-diameter (394-mm) in the front and 15-inch-diameter (380-mm) in the rear
  • Larger brake calipers with substantially increased pad area
  • Standard Magnetic Selective Ride Control with track-level suspension
  • Wider, carbon-fiber front fenders with ZR1-specific dual vents
  • Carbon-fiber hood with a raised, polycarbonate window – offering a view of the intercooler below it
  • Carbon-fiber roof panel, roof bow, front fascia splitter and rocker moldings with clear-coated, exposed carbon-fiber weave
  • ZR1-specific full-width rear spoiler with raised outboard sections
  • Specific gauge cluster with boost gauge (also displayed on the head-up display) and 220-mph (370 km/h) speedometer readout
  • Only two options: chrome wheels and a “luxury” package
  • Curb weight of approximately 3,350 pounds (1,519 kg)
  • The specialized components of the new ZR1 work harmoniously to deliver the most powerful and fastest automobile ever produced by General Motors. Performance estimates will be announced closer to vehicle’s summer 2008 launch.

“Preliminary testing shows the ZR1 builds on the highly respected Corvette Z06 in every performance category, from acceleration and braking, to cornering grip and top speed,” said Peper. “It all boils down to the power-to-weight ratio and the ZR1′s is exceptional – better than the Porsche 911 GT2, the Ferrari 599 and even the Lamborghini LP640. In fact, the ZR1 is expected to be the first production Corvette to achieve a top speed of at least 200 mph.”

Supercharged LS9 engine

The new LS9 6.2L small-block engine is the power plant the supports the ZR1′s performance capability. The enabler of the LS9′s performance and refinement is a large, positive-displacement Roots-type supercharger with a new, four-lobe rotor design. It is augmented with an integrated charge cooling system that reduces inlet air temperature for maximum performance.

A sixth-generation supercharger developed by Eaton helps the LS9 make big power and torque at lower rpm and carries it in a wide arc to 6,600 rpm, as it pushes enough air to help the engine maintain power through the upper levels of the rpm band – the area where supercharged performance tends to diminish. Heavy-duty and lightweight reciprocating components enable the engine’s confident high-rpm performance.

The LS9 is hand-assembled at GM’s Performance Build Center , in Wixom, Mich. , and incorporates specialty processes typically seen in racing engines to produce a highly refined and precise product. For example, cast iron cylinder liners are inserted in the aluminum block and are finish-bored and honed with a deck plate installed. The deck plate simulates the pressure and minute dimensional variances applied to the block when the cylinder heads are installed, ensuring a higher degree of accuracy that promotes maximum cylinder head sealing, piston ring fit and overall engine performance.

Transmission and axle

The LS9 engine is backed by a new, stronger six-speed manual transmission and a twin-disc clutch that provide exceptional clamping power, while maintaining an easy clutch effort. ZR1-specific gearing in the transmission provides a steep first-gear ratio that helps launch the car, and top speed is achieved in sixth gear – a change from the fifth-gear top-speed run-outs in the manual-transmission Corvette and Corvette Z06.

As the term implies, the twin-disc clutch system employs a pair of discs, which spreads out the engine’s torque load over a wider area. This enables tremendous clamping power when the clutch is engaged, while also helping to dissipate heat better and extend the life of the clutch.

The twin-disc clutch system also contributes to the ZR1′s exceptional driving quality, with smooth and easy shifting. The twin-disc system’s design enables a 25-percent reduction in inertia, thanks to smaller, 260-mm plates, corresponding to a pedal effort that is similar to the Corvette Z06′s 290-mm single-disc system.

The rear axle also is stronger in the ZR1 and features asymmetrical axle-shaft diameters that were developed after careful testing to provide optimal torque management. The axles are also mounted on a more horizontal plane that correlates with the wider width of the rear wheels and tires.

Ride and handling

The ZR1 is built on the same aluminum-intensive chassis as the Corvette Z06 and features similar independent SLA front and rear suspensions, with aluminum upper and lower control arms. Where the ZR1 differs is the suspension tuning, which was optimized for the car’s steamroller-wide front and rear tires.

Magnetic Selective Ride Control is standard and tuned specifically for the ZR1. The system’s ability to deliver a compliant ride with nearly instantaneous damping adjustments enabled engineers to develop a surprisingly supple ride quality in a supercar that still delivers cornering grip of more than 1g.

From a high-performance perspective, Magnetic Selective Ride Control helps the rear axle remain planted during launch for smooth, hop-free acceleration. It also helps suppress axle movement when cornering on broken or uneven pavement.

Brakes, wheels and tires

Commensurate with the ZR1′s engine output is the braking system, which is headlined by carbon-ceramic brake rotors. Found on only a few exotics and more expensive supercars, carbon-ceramic brake rotors are made of a carbon-fiber-reinforced ceramic silicon carbide material . Their advantage comes in low mass and resistance to wear and heat. In fact, the rotors should never show any corrosion or require replacement for the life of the vehicle, when used in normal driving.

The vented and cross-drilled rotors on the ZR1 measure 15.5 inches (394 mm) in diameter in the front and 15 inches (380 mm) in diameter in the rear – making them among the largest carbon-ceramic rotors available on any production vehicle.

Clamping down on the high-tech rotors are six-piston front calipers and four-piston rear calipers, each painted a ZR1-exclusive blue. The front pads are equivalent in size to the largest on any production car with a single-pad design – double that of the Corvette Z06′s 70-sq.-cm. front pads.

The brakes are visible through the ZR1′s exclusive wheels: 20-spoke alloy rims that measure 19 inches in diameter in the front and 20 inches in the rear. They come standard with a bright, Sterling Silver paint finish and chrome versions are optional. The wheels are wrapped in Michelin Pilot Sport 2 tires developed specifically for the ZR1, measuring P285/30ZR19 in front and P335/25ZR20 in the rear.

Exclusive exterior

The ZR1 is instantly recognizable, with perhaps the most identifiable feature a raised, all-carbon-fiber hood that incorporates a clear, polycarbonate window. The window provides a view of the top of the engine’s intercooler, with the legend “LS9 SUPERCHARGED” embossed on the left and right sides, and an engine cover with the Corvette crossed flags logo debossed at the front.

The underside of the hood has an exposed carbon-fiber-weave. Exposed carbon-fiber is used on the roof, roof bow, rocker molding and front splitter. These exterior components are protected by a specially developed glossy, UV-resistant clear coat that resists yellowing and wear.

Widened, carbon-fiber front fenders with specific, dual lower vents, and a full-width, body-color rear spoiler incorporating the center high-mounted stop lamp, are also unique to the ZR1. All of the exterior features of the car were developed to enhance high-speed stability and driver control.

Interior details
The ZR1′s interior builds on the brand’s dual-cockpit heritage, with high-quality materials, craftsmanship and functionality that support the premium-quality experience promised by the car’s performance. The ZR1′s cabin differs from the Corvette and Corvette Z06 with the following:

  • ZR1-logo sill plates
  • ZR1-logo headrest embroidery
  • Specific gauge cluster with “ZR1″ logo on the tachometer and a 220-mph (370 km/h) readout on the speedometer
  • Boost gauge added to the instrument cluster and Head-Up Display
  • The “base” ZR1 (RPO 1LZ) comes with accoutrements based on the Z06, including lightweight seats and lightweight content. The uplevel interior package includes unique, power-adjustable and leather-trimmed sport seats (embroidered with the ZR1 logo); custom, leather-wrapped interior available in four colors; navigation system, Bluetooth connectivity and more.

By the numbers In addition to the exterior cues and powertrain, ZR1 models will be distinguished from other Corvette models by their VIN. Each will carry a unique, identifying VIN digit, as well as a sequential build number. This makes it easy to determine the build number of a specific car – information treasured by enthusiasts and collectors. For example, a ZR1 with a VIN ending in “0150″ would indicate it is the 150 th ZR1 built for the model year.


Sources:
Press Release: National Corvette Museum

Related:
2009 Corvette ZR1 Image Gallery
Corvette ZR1 News Archive

Technorati Tags:
| | |

The 6.2L LS9 V8: Heart of the 2009 Corvette ZR1

by Keith Cornett on December 20, 2007

The 2009 LS9 6.2L V8 will power the new Corvette ZR1

The small block V8 is one of the most enduring engines ever produced and time and again, the engineers at GM have found ways to push performance and efficiency to new levels. So its only fitting that with the flood of information that’s been released about the upcoming 2009 Chevrolet Corvette ZR1, we take a few minutes to stare in awe of what is essentially the heart of the new King of the Hill, the all-new LS9.

While the Corvette Z06 gets is power from the raw displacement of the 7.0L LS7, engineers took a step back by bringing the engine size back down to 6.2 liters and then boosted the power with a Eaton designed roots-type supercharger. Creating more power at lower RPM’s is the signature of the LS9. At 3,000 RPM’s the engine makes approximately 300 horsepower. GM has targeted 100 horsepower per liter, or 620 total horsepower and 595 pounds of torque. The SAE certified figures will be available in March 2008.

Press Release

2009 CORVETTE ZR1 POWERED BY THE MOST POWERFUL PRODUCTION ENGINE EVER FROM GM: THE SUPERCHARGED LS9 SMALL-BLOCK V-8

PONTIAC , Mich. – When it arrives next summer, the 2009 Chevrolet Corvette ZR1 will be the most powerful and fastest production car ever produced by General Motors, with performance enabled by a new, supercharged 6.2L LS9 small-block V-8 engine.

Incorporating the engineering experience already found in the Corvette Z06′s LS7 engine and the new-for-2008 6.2L LS3 of the Corvette, GM Powertrain is targeting 100 horsepower per liter for the LS9, or 620 horsepower (462 kW), and approximately 595 lb.-ft. of torque (807 Nm); final SAE-certified power levels will be available in early March 2008.

It is, indeed, the ultimate small-block engine for the ultimate Corvette.

“When you experience the LS9 in the Corvette ZR1, the terms performance and refinement take on a new meaning,” said Tom Stephens, group vice president for GM Powertrain and Quality. “The LS9 demonstrates an outstanding performance range, with smooth driveability at low speeds, and surprisingly fierce performance when the customer wants more power.”

The enabler of the LS9′s performance is a new, large positive-displacement Roots-type supercharger – with a unique four-lobe design – developed for the engine by Eaton. It is teamed with an integrated charge cooling system that reduces inlet air temperature for maximum performance. The LS9 represents the first of several new, supercharged small-block engines that will be introduced in GM vehicles in the near future, each using superchargers of similar design.

“The small-block V-8 once again demonstrates it boundless horsepower potential, versatile design and an architecture with proven quality, durability and reliability,” said Stephens. “We haven’t yet realized the small-block’s performance potential.”

Performance range

More than just its tremendous peak horsepower and torque numbers, the supercharged LS9 makes big power at lower rpm and carries it in a wide arc to 6,600 rpm. GM Powertrain testing shows the engine makes approximately 300 horsepower (224 kW) at 3,000 rpm and nearly 320 lb.-ft. of torque (434 Nm) at only 1,000 rpm. Torque tops 585 lb.-ft. (793 Nm) at about the 4,000-rpm mark, while horsepower peaks at 6,500 rpm. The engine produces 90 percent of peak torque from 2,600 rpm to 6,000 rpm.

Heavy-duty and lightweight reciprocating components enable the engine’s confident high-rpm performance, while the large-displacement Eaton supercharger pushes enough air to help the engine maintain power through the upper levels of the rpm band.

“The sixth-generation design of the supercharger expands the ‘sweet zone’ of the compressor’s effectiveness, broadening it to help make power lower in the rpm band,” said Ron Meegan, assistant chief engineer. “To put it simply, the low-end torque is amazing.”

The LS9 is assembled by hand at GM’s Performance Build Center , a unique, small-volume engine production facility in Wixom , Mich. , that also builds the Corvette Z06′s LS7 engine and other high-performance GM production engines.

Cylinder block and reciprocating assembly details

The LS9′s aluminum cylinder block features steel, six-bolt main bearing caps, with enlarged vent windows in the second and third bulkheads for enhanced bay to bay breathing. Cast iron cylinder liners – measuring 4.06 inches (103.25 mm) in bore diameter – are inserted in the aluminum block and they are finish-bored and honed with a deck plate installed. The deck plate simulates the pressure and minute dimensional variances applied to the block when the cylinder heads are installed, ensuring a higher degree of accuracy that promotes maximum cylinder head sealing, piston ring fit and overall engine performance.

Nestled inside the cylinder block is a forged steel crankshaft that delivers the LS9′s 3.62-inch (92 mm) stroke. It features a smaller-diameter ignition-triggering reluctor wheel and a nine-bolt flange – the outer face of the crankshaft on which the flywheel is mounted – that provides more clamping strength. Other non-supercharged 6.2L engines, such as the base Corvette’s LS3, have a six-bolt flange. A torsional damper mounted to the front of the crankshaft features a keyway and friction washer, which also is designed to support the engine’s high loads.

Attached to the crankshaft is a set of titanium connecting rods and forged aluminum pistons, which, when combined with the cylinder heads, delivers a 9.1:1 compression ratio. This combination is extremely durable and lightweight, enabling the LS9′s high-rpm capability.

Cylinder head details

The basic cylinder head design of the LS9 is similar to the L92-type head found on the LS3 V-8, but it is cast with a premium A356T6 alloy that is better at handling the heat generated by the supercharged engine – particularly in the bridge area of the cylinder head, between the intake and exhaust valves.

In addition to the special aluminum alloy, each head is created with a rotocast method. Also known as spin casting, the process involves pouring the molten alloy into a rotating mold. This makes for more even distribution of the material and virtually eliminates porosity – air bubbles or pockets trapped in the casting – for a stronger finished product.

Although the heads are based on the L92 design, they feature swirl-inducing wings that are cast into the intake ports. This improves the mixture motion of the pressurized air/fuel charge. The charge enters the combustion chambers via titanium intake valves that measure 2.16 inches (55 mm) in diameter. Spent gases exit the chambers through 1.59-inch (40.4 mm) hollow stem sodium-filled exhaust valves. The titanium intake and sodium-filled exhaust valves are used for their lightweight and high-rpm capability.

To ensure sealing of the pressurized engine, unique, four-layer steel head gaskets are used with the LS9′s heads.

Camshaft and valvetrain

The broad power band enabled by the LS9′s large-displacement supercharger allows it to make strong low-end torque and great high-rpm horsepower, which allowed engineers to specify a camshaft with a relatively low lift of 0.555-inch (14.1 mm) for both the intake and exhaust valves. This low-overlap cam has lower lift and slower valve-closing speeds than the Z06′s 505-horsepower (377 kW) LS7, helping the LS9 – with its approximately 620 horsepower – deliver exemplary idle and low-speed driving qualities.

The camshaft actuates a valvetrain that includes many components, including the lifters, rocker arms and valve springs, of the LS3 engine. However, LS7 retainers are used to support the engine’s high-rpm performance.

Supercharger and charge cooler details

The LS9′s R2300 supercharger is a sixth-generation design from Eaton, with a case that is specific to the Corvette application. The supercharger features a new four-lobe rotor design that promotes quieter and more efficient performance, while its large, 2.3-liter displacement ensures adequate air volume at high rpm to support the engine’s high-horsepower aspiration. Maximum boost pressure is 10.5 psi (0.72 bar).

The supercharger is an engine-driven air pump that contains a pair of long rotors that are twisted somewhat like pretzel sticks. As they spin around each other, incoming air is squeezed between the rotors and pushed under pressure into the engine – forcing more air into the engine than it could draw under “natural” aspiration. The rotors are driven by a pulley and belt that are connected to the engine’s accessory drive system.

Because the pressurized air is hotter than naturally aspirated air, the LS9 employs a liquid-to-air charge cooling system to reduce inlet air temperature after it exits the supercharger – reducing the inlet air temperature by up to 60 degrees C (140 F). Cooler air is denser and allows the engine to make the most of its high-pressure air charge. The charge cooling system includes a dedicated coolant circuit with a remote-mounted pump and reservoir.

The design of the supercharger case and its integrated charge cooling system was driven by the space and dimensions afforded under the Corvette’s hood. To that end, the charge cooler was designed as a “dual brick” system, with a pair of low-profile heat exchangers mounted longitudinally on either side of the supercharger. Coupled with the supercharger itself, this integrated design mounts to the engine in place of a conventional intake manifold and is only slightly taller than a non-supercharged 6.2L engine. The air inlet and rotor drive pulley are positioned at the front of the supercharger.

Additional engine details

Oiling system: The LS9 uses a dry-sump oiling system that is similar in design to the LS7′s system, but features a higher-capacity pump to ensure adequate oil pressure at the higher cornering loads the ZR1 is capable of achieving. An oil-pan mounted oil cooler is integrated, too, along with piston-cooling oil squirters located in the cylinder block. The expanded performance envelope of the Corvette ZR1 required changes to the dry sump system also used in the Z06. System capacity is increased and scavenge performance improved to meet the demands of Chevrolet’s highest-performance sportscar.

Water pump: To compensate for the heavier load generated by the supercharger drive system, an LS9-specific water pump with increased bearing capacity is used.

Accessory drive system: To package the accessory drive system in the Corvette’s engine compartment, the supercharger drive was integrated into the main drive system. This required a wider 11-rib accessory drive system to be used with the LS9 in order to support the load delivered by the supercharger.

Fuel system: The LS9 uses high-capacity 48-lb./hr. fuel injectors with center-feed fuel lines. The center feed system ensures even fuel flow between the cylinders with less noise. In order to ensure fuel system performance during low speed operation as well as under the extreme performance requirements of wide open throttle (WOT), a dual pressure fuel system was developed. This system operates at 250 kPa at idle and low speed, and ratchets up to 600 kPa at higher-speed and WOT conditions.

Throttle body: An 87-mm, single-bore throttle body is used to draw air into the engine. It is electronically controlled.

Rocker covers / ignition coils: Unique rocker covers with new, direct-mount ignition coils are used. Other Gen IV engines, such as the LS3, feature coil packs mounted to a bracket. The LS9′s direct-mounted coils offer a cleaner appearance and a shorter lead between the coil and spark plug.

Beauty cover: A special engine cover is attached to the top of the LS9. It surrounds the intercooler, which is visible through a hood window. The intercooler has the legend “LS9 SUPERCHARGED” embossed on the left and right sides, and the engine beauty cover features the Corvette crossed flags logo debossed at the front.

New six-speed manual transmission

The Corvette ZR1′s LS9 engine is backed by a Tremec TR6060 six-speed manual transmission, with a twin-disc clutch system. It is based on the new-for-2008 TR6060 six-speed, but upgraded to handle the LS9′s torque output and delivers improved shift quality.

The twin-disc clutch system provides exceptional clamping power, while maintaining an easy clutch effort. The system employs a pair of 260-mm discs, which spreads out the engine’s torque load over a wider area, enabling tremendous clamping power to channel the LS9′s torque. It also dissipates heat better and extends the clutch life (in normal driving).

Thanks to comparatively small plates, the twin-disc system enables similar disc inertia to the Corvette Z06, which has a 290-mm single-disc system, contributing to low shift effort and providing exceptionally smooth engagement and light pedal effort. In fact, the more powerful ZR1 has a pedal effort similar to the Z06.

ZR1-specific gearing in the transmission provides a steep first-gear ratio that helps launch the car. The car’s top speed is achieved in sixth gear – a change from the fifth-gear top-speed run-outs in the manual transmission Corvette and Corvette Z06. The gears also are designed to balance performance with refinement. The angles of the gear teeth are optimized to provide both strength and quietness.


Sources:
National Corvette Museum

Related:
The New King of the Hill: The 2009 Corvette ZR1
2009 Corvette ZR1 Image Gallery
Corvette ZR1 News Archive

Technorati Tags:
| | |

Dealers Take Corvette Buyers on a Virtual Test Drive

by Keith Cornett on December 16, 2007

Corvette dealerships are utilizing the advantages of broadband connections and video sharing websites to allow customers to not only see a Corvette they may be interested in purchasing, but to actually take the car on a virtual test drive. The American Sportscar Center in Atlanta, Georgia has been busy cranking out these virtual test drive videos for a select number of their Corvettes like this one for a 1959 Corvette Convertible. Not only do these videos allow the customer to see the Corvette from all angles, but the ability to actually hear the car running as well as riding shotgun on a run down the highway at 60 mph creates a memorable experience that I am sure will lead to an increase in sales.

The virtual test drive videos also serve a dual purpose as advertising for the dealership on the social video websites like YouTube.com and StreetFire.net, I am certain that we will be seeing more dealers move towards producing these video test drives in the near future.
Source: BuyaVette.net Related:
Video: 2008 Chevrolet Corvette Z06 Quick Drive Technorati Tags:
| | | | |

In 1965, as in previous years, General Motors and Chevrolet were touring the country showing off their latest products to the masses at car shows and the company-sponsored motoramas.

Marketing was concerned that the Corvette, in its third year of the fabled midyear body style, might be looking a bit aged and so they set out to create a display that became a mechanical marvel.

Selecting a 1965 Corvette Coupe from the assembly line, the car was shipped to a specialty display making company where it was fully disassembled and then operated on to create the one-of-a-kind Corvette display we see in the video.

Mounting the body to elevator arms, the coupe would rise off its chassis, exposing the car’s running gear. The frame was painted in bright yellow while the engine, transmission and other mechanical parts were finished in red. Cutouts were created to display the inner workings of the car. A series of motors would operate moving components of the car allowing visitors to see exactly how the 375 horsepower fuel injected 327ci was powered.

After its life on the show circuit, whereabouts of the car were unknown. It was found in South Africa in the mid ’90′s and returned to the United States where is was purchased a short time later by Al Wiseman.

This 1965 Corvette is unique in many regards, especially considering the fact that it contained the last of the fuel injected engines. With only 4 miles showing on the odometer, it truly is a time capsule.

Back at the auction, bidding was steady and deliberate and finally the last bid of $640,000 was called. With the addition of the 10% buyers commission, total price of the 1965 Chevrolet Corvette Cutaway Autorama Display was $704,000. The buyer of this unique Corvette was Detroit’s Showdown Muscle Cars.


Source:
RM Auctions

Related:
Video: Matched Set of 1953/2003 Corvettes sell for $390,500
Video: Zora’s 1955 Corvette Sold By RM Auctions for $134,750

 

Here is something that you don’t see everyday and in the words of the auctioneer, it’s probably something that will never be duplicated! We’re talking of course about the matched set of Corvettes that was sold at Saturday’s RM Auctions Al Wiseman Collection in Tarpon Springs, Florida. Al had a 1953 Corvette with the serial number of #39. When the 50th Anniversary Corvettes were produced in 2003, Al lobbied GM quite hard for about a year and was successful in buying serial number #39, which was doing duty as a test mule. Topping off the collection was a commemorative 1953 Corvette pedal car from Pedal Cars USA produced to celebrate the Corvette’s golden anniversary. This unique Corvette pedal car also is number #39 in its series.

The 1953 Corvette has been in Al’s collection for around 5 years and has just completed a full concours quality restoration. Al was no stranger to 1953 Corvettes. Back in 2002 he teamed up with Chip Miller of Carlisle Productions to restore serial #158. That Corvette, dubbed “Restoration Celebration”, was restored to better than perfect condition and the proceeds from the sale of that car were donated to charity.

Interestingly, the sale of both of these 1953 Corvettes ended up in the hands of the same buyer…Terry Michaelis of Proteam Corvettes.

And while the buyer and seller of both 1953 Corvettes remained the same, what has changed in the last five years is the prices commanded for the first year of America’s Sports Cars. #158 was purchased for $170,000 in 2002 while 1953 Corvette #39 brought in $390,500 just five years later.

Yes, this auction of the 1953 Corvette had the bonus of a serial numbers-matching 2003 50th Anniversary Corvette Roadster, as well as the kids commemorative pedal car, but it was the 1953 Corvette that drove this sale home.


Source:
RM Auctions

Related:
Video: Zora’s 1955 Corvette Sold By RM Auctions for $134,750

 

RM Auctions was in the Tampa Bay area this weekend to auction off the collection of antique and classic cars belonging to noted automotive collector Al Wiseman. Included in the auction was this very significant 1955 Corvette Roadster that belonged to Zora Arkus-Duntov, Corvette’s first Chief Engineer.

READ MORE →

Ultimate Factory: Building the Chevrolet Corvette Z06

by Keith Cornett on November 27, 2007

The National Geographic Channel is kicking off their second season of Ultimate Factories on Thursday night with an in-depth look at the manufacture and assembly of Chevrolet’s Corvette Z06. The one hour show gives viewers an unprecedented look at not only the processes of production, but focuses on the people behind the scenes that bring our favorite car to life. The host of the show is Kevin Moore, who gets the awesome responsibility of going beyond the visitor’s line and doing the Corvette production jobs we wish we could try once, like assembling by hand the Z06′s LS7 engine at the Performance Build Center in Wixom, Michigan or starting the Corvette for the first time and taking it through the quality control tests. Here is a promo of what you can expect to see on Ultimate Factories: Corvette

Ultimate Factories: Corvette will air on Thursday, November 29th at 10:00 PM EST. The show will reair on Friday, November 30th at 1:00 AM EST and Saturday, December 1st at 2:00 PM EST.
Source:
National Geographic Channel via GM FYI Blog Related:
AutoBlog Tours The Corvette Assembly Plant Technorati Tags:
| | | | |