Add These Customer Favorites from ACS Composite to your C8 Corvette Z06 or E-Ray

2
5492

Add These Customer Favorites from ACS Composite to your C8 Corvette Z06 or E-Ray

Photo Credit: ACS Composite


When you’re ready to start making improvements to your C8 Corvette, one of the first choices should be our friends at ACS Composite. I always enjoy these monthly roundups as it’s a great opportunity to share such a wide array of different products they offer for helping you create a ride that’s all your own.

What does your Corvette need? Want to rev up your aerodynamics? ACS offers a variety of splitters, rockers, and spoilers that were designed and manufactured in-house. They will look so good on your car, you’ll swear they were OEM. And because they come from ACS, you can be rest assured that they are built with the highest standards to last.

ACS also offers a number of different customizations for your rides, and well as our all-time favorite “protection” mod – ACS Composite’s C8 Rock Guards for Z06 and E-Ray. Are you ready to make the Corvette in your driveway the one you’ve wanted all along? Check out these customer-favorite mods from ACS Composite.

C8 Coupe Engine Compartment Overlay

C8 Coupe Engine Compartment Overlay

Enhance Your C8’s Engine Compartment!! GM designers created the C8 Corvette Coupes models so that they would be a rolling display with their mighty powerplants viewable through the rear engine hatch. But when your hatch is raised, all you’re doing is showing off that raw, unfinished plastic that surrounds your “jewel under glass.” ACS Composite’s Engine Compartment Overlays will completely transform the look of your C8 Coupe with overlays available in every C8 exterior body color or take your customization to the next level by bringing a secondary color into the mix.

C8 Coupe Engine Compartment Overlay

There are three pieces to the Engine Compartment Overlays and ACS Composite offers a version for those for Corvettes with Magnetic Ride Control (wires on the rear struts) and non mag-ride suspensions (no wires on rear struts), and it you can really finish it off by also adding the louvered engine appearance panels if your C8 Corvette was built without them. And once the ECO is in place, maintenance of your engine bay becomes much easier, especially if you decide to add a ceramic coating to your new ECO panels.

These Engine Compartment Overlays are manufactured with ACS Composite’s proprietary PC Composite material via a plastic injection process that is thermally stable and designed for the high engine bay temperatures. Best of all, the installation process is among the easiest you will ever experience…just set it on top of the engine compartment’s frame and it is held in place once the hatch bump stops sandwich it into place. No hardware, tools, or drilling required…just set it and forget it!


The C8 Coupe Engine Compartment Overlays are currently on sale at ACS Composite, with pricing set between $1,344.60 for Carbon Flash Black or add some color to your life by selecting one of Corvette’s exciting exterior colors which range from $1,456.92 to $1,672.92.

C8 Z06/E-Ray Z07 Front Splitter

C8 Z06/E-Ray Z07 Front Splitter

Are you ready to take your C8 Corvette Z06 or E-Ray to the next level of both performance and styling? ACS Composite has just the ticket for those owners whose E-Rays or Z06s are equipped with the standard painted chin spoiler. Now you can add this precision-designed Z07-style front splitter to your sports car. This splitter offers great looks while also enhancing your Corvette’s frontal downforce for better grip and stability through the turns. The splitter is finished in Carbon Flash Metallic and will perfectly match all your other black exterior trim on your Corvette Z06 or E-Ray.

ACS Composite’s Z07 Front Splitter is a one-piece design that offers the looks of the C8 Z06’s Z07 front splitter, but without the required canards/dive planes. It’s finished in Carbon Flash Black Metallic so it will match your standard rocker panels and other trim and fascia components. The splitter is manufactured from their proprietary PC Composite material which offers three times the strength and is more scratch resistant than those made from fiberglass or ABS Plastic. No drilling is required during installation and it’s completely reversible.

C8 Z06/E-Ray Z07 Front Splitter

This is another very easy mod that anyone can do as the ACS Z07 Front Splitter simply installs with all the existing OEM mounting points. ACS Composite includes a 7mm ratchet to help with the job, and most owners can swap out their existing chin spoilers for this one-piece design in as little as 30 minutes.

Pricing for the C7 Z06/E-Ray Z07 Front Splitter is $1,699 and shipping is free. Redefine your driving experience and conquer the road with confidence. The ACS Z07 Front Splitter is the upgrade your C8 Corvette deserves.

C8 Z06 E-Ray Rock Guards

C8 Z06 E-Ray Rock Guards

I’ve mentioned previously that ACS Composite Rock Guards for the Z06/E-Ray was the first mod I added to my 2025 Corvette E-Ray. I ordered a set from ACS even before my Corvette was built and then sent them to Criswell Chevrolet where they were installed during PDI. With a nearly 1,000-mile drive home from Baltimore, I wanted to be sure to have the added protection against rock chips and other road debris getting kicked up and sent rearward against my E-Ray’s flanks.

ACS Composite’s Rock Guards for Z06 & E-Ray are manufactured from their proprietary PC Composite material and they are very strong yet weigh in at nearly next to nothing. And because they are finished in Carbon Flash Metallic paint, they look exactly like the other carbon flash trim on the car. We also like how they protect that tunnel behind the rear wheels with a mesh insert for added protection. The E-Ray/Z06 Rock Guards feature the integrated tabs which snap into place inside the wheel wells, so installation is quick and easy. You can see the official installation video below.

C8 Z06 E-Ray Rock Guards
We love the OEM look of these rock guards and how they offer much more coverage than GM’s standard mud flaps. The secret to the design is the innovative bladed-shield technology which redirects any rocks or debris downward and away from your car. The Rock Guards utilize a wide edge and a bladed shield to help prevent debris from entering the wheel wheels and those that do are prevented from being sent rearward.

Check out the video with Joseph from ACS showing off the Rock Guards for Z06/E-Ray and you can see just how easy they are to install. ACS Composite Rock Guards for the C8 Corvette Z06 and E-Ray are priced at $649 per set and shipping is free. Order your Rock Guards today!


ACS Composite

ACS Composite is all about helping Corvette owners get the most out of their sports cars with their lineup of high quality parts and accessories. Their current portfolio of parts and accessories for the C7/C8 includes a number of different spoilers, front splitters, and side rocker panels, plus they offer parts and accessories for protecting your car including Jacking Pucks, C8 Wheel Stud Extenders, and their C8 Protective Lug Nut Tool.

Visit ACS Composite on the web at acscomposite.com or call them at 1-888-227-2270 for any pre-sale questions you may have.


Source:
ACS Composite

Subscribe Now:

 

2 COMMENTS

  1. Until ASC commits to exhaustive wind tunnel results ‘none’ of their products should be consider!
    GM products use the “state of the art technology ” and only should be considered, as well as the ‘Gold standard’ for the entire Corvette aftermarket industry, period?

    Many thanks,
    Ray

Comments are closed.