Upgrade your C7 Corvette Stingray, Grand Sport or Z06 with ACS Composite’s new C7 ZR1 hood! It’s the ultimate upgrade that brings the menacing look of the C7 Corvette ZR1 to the rest of the Corvette lineup.
The new ACS C7 ZR1 hood fits 2014-2019 C7 Corvettes and it’s a direct bolt-on with no modifications needed!
The C7 ZR1 hood features two large-mouth extractors at the nose of the hood to help alleviate your under-the-hood temperatures. The hood also offers 30mm of extra engine clearance for top-mounted superchargers and the mounting hardware is designed and engineered to ensure maximum impact resistance.
ACS Composite has been producing aftermarket hoods for over 20 years now. The ACS C7 ZR1 hood is manufactured in fiber-reinforced polymer (FRP) and will be shipped prepped and primed.
The C7 ZR1 hood represents the second hood available from ACS Composite for Corvette enthusiasts to customize their Corvettes and it joins the carbon-fiber Zero7 Hood with Window available from the company.
Release the true potential of your C7 Corvette with the new C7 ZR1 hood from ACS Composite! To see the full lineup of products available for your C6 or C7 Corvette, visit ACS Composite.
Source:
ACS Composite
Related:
[VIDEO] Watch ACS Composite Install a Set of XL Front Rock Guards on a C7 Corvette Z06
[VIDEO] Installing ACS Composite’s Carbon Flash Fender Extensions on C7 Corvette Z06/Grand Sport
ACS Composite Offers New Bolt-On Widebody Kits the C7 Corvette Stingray
-
![[VIDEO] Chevrolet Was Prepared to Build the C7 and C8 Corvette Simultaneously](https://www.corvetteblogger.com/images/content/uploads/2024/04/042224_7-218x150.jpg "[VIDEO] Chevrolet Was Prepared to Build the C7 and C8 Corvette Simultaneously")
Now, if ACS would make a cleanly styled, replaceable rear panel, for the C7, ..with round taillights…
then they would have something. 🙂
Why? The rear end is the best looking of all the years.
Comments are closed.