Corvette Oddball: Andy Granatelli’s Turbine-Powered C3 Corvette


Andy Granatelli Turbine-Powered C3 Corvette

Did Chevy ever really seriously consider developing a turbine-powered Corvette? The short answer is “No!”. They may have talked about it over lunch, but Chevy never got into the turbine craze of the late sixties. But just because Chevy was never on-board doesn’t mean others haven’t looked to build their own turbine powered Corvette.

Car designers have been playing around with the notion of a turbine-powered car since the dawn of the jet age. Chrysler stunned everyone in ’63 with their Ghia-built, bronze Chrysler Turbine Car. At the 1964-65 New York World’s Fair you could actually take a slow ride in the bronze beauty.

Then in 1967, Andy Granatelli floored the racing world with his STP sponsored Indy 500 racer. The car was built in total secret and was completely in line with Indy 500 racing rules, so they couldn’t preclude the car from racing. Parnelli Jones drove the 550-horsepower Pratt & Whitney-powered, four-wheel-drive racer and SMOKED everyone on the track that day. That is, until a $20 bearing broke on the second to last lap, costing the team the race.

Andy Granatelli Turbine-Powered C3 Corvette

The following year, Granatelli came back with a wedge-shaped STP sponsored turbine racer. But the Indy 500 rules makers caved to pressure and placed so many restrictions on turbine-powered Indy racers that they were no longer competitive. Thus ended the short and very interesting era of the Indy turbine cars. Since then, turbine-powered cars have been not much more than a novelty act.

By the late 1970’s, Andy Granatelli’s son, Vince, was running “The Pit Stop Service” shop in Van Nuys, California. Friend Herb Orlowitz, owner of Corprajet Leasing, loved fast jets and commissioned Granatelli to build him a fast, turbine-powered car.

The Corvette was chosen because it was the only car they could find that would accommodate the long turbine engine. The engine, by the way, was the same unit that Granatelli used in the ’67 Indy turbine car. The front end of the car is essentially a shell to cover the engine. Talk about a lowly start, the Pratt & Whitney turbine engine was originally designed to be a power generator for oil drilling rigs. (Kind of like the trash compactor character in the new film, “Wall-E”)

Granatelli connected the turbine engine to a modified GM Turbo 400 automatic transmission with a beefed up drive shaft. Exhaust for the car was tricky. The single exhaust vent of the turbine was connected to a wide, shallow box that was mounted under the car. Turbines flow a tremendous amount of air, precluding any kind of tubular exhaust system. The exhaust vent at the rear was as wide as the underside of the car. The heat coming out of the back of the car must have been stupendous. That s one way to discourage tailgaters!

The rear luggage space was taken up with 6 car batteries required to spark the engine alive. The stock Corvette disc brakes were replaced with heavy-duty NASCAR vented racing brakes. After the car was started, driving technique around town consisted of lifting your foot off the brakes to let the car move forward. (That must have taken some getting used to) The exterior of the car was completely stock with silver and black paint, factory front and rear spoilers, and Centerline wheels. For an odd-ball car, it was very good looking.

Andy Granatelli Turbine-Powered C3 Corvette

After all that, “how fast” you ask? The first day at the drag strip crunched the drive shaft. With a repaired drive shaft and a soft launch, the turbine Vette ran the quarter-mile in 12.0-seconds at 111 mph. The claimed top speed was 180 mph. The total cost of the car was never published, but later reports put the price at $750,000. Motor Trend magazine covered the car in the November ’79 issue. To the best of my knowledge, that was the only ink the car ever received.

When I was researching this car in the Net, I was surprised to find nothing at all. Zero! Not a mention or an update as to the car’s whereabouts. So, if you know anything about this Odd-Ball Corvette, I’d love to know and will publish an update.

– Article Contributed By K. Scott Teeters

K. Scott Teeters is an artist and writer of the the popular Illustrated Corvette Series column as seen in Vette magazine for over 12 years. Enjoy more of Scott’s articles and sign up for his Free Illustrated Corvette Series Corvette Engine Spotters Guide Ebook at His Corvette art can be found at Save the wave!

Illustrated Corvette Series

Motor Trend Video: Corvette Blue Devil vs Blue Angel
The VoltVette: Man Builds a Plug-In Electric Corvette



  1. Try Houston , Texas – the Moore Collection. I was told he bought the ‘Vette at auction, probably early 80’s, bidding came down to him and Reggie Jackson.

  2. IN 1983/84 the car was in Houston, Texas. Back then I raced Pro Street and Pro Stock Eliminator out of Houston and it was common for racers to hang out on weekends in parking lots with our cars, hoods off, etc, to show off. The Granatelli Corvette was often there, and often driven around north Houston. I remember the driver saying he was able to fuel up at a place on Greens Road near the airport, as that was one of the rare places that sold the fuel the car ran on. The car made the local papers in Houston as well.

    Behind the car at a stop light there was quite a visible heat wave that made the air shimmer.

  3. Almost forgot: at that time Andy Granatelli was still associated with the car, and if I remember correctly it was said around Houston that he was it’s builder and owner. I know it was used as free publicity for his chain of stores (oil change stores) in the Houston area at that time.

    Ironically another Houston racer and acquaintance of mine back then, A.J. Foyt, also had a chain of stores in Houston (Honda motorcycle dealerships) and he was the driver who actually won the Indy race that saw the Granatelli STP Turbine car break down with a busted gearbox ball bearing holder, which isn’t surprising as Andy had changed the gearbox in that car half a dozen times in a two week period before qualifying day.

  4. Back in 1979, I was in the LA area of Southern California riding a motorcycle that I owned at the time. I hear this loud whining noise like a jet. I start looking up at the sky and around and can’t figure out what it is. Then I localize on where the sound is coming from and see this Corvette with a personalized license plate of something like “TURBINE”, “TRBINE” or there about. It was *very* noticeable.

  5. Hello i drove the turine vett for 6 weeks in 1998 i still am in contact with the owner made the turbines for Andy for indy 67-68 i have a lot of data on the indy cars ,fi,trains,boats,trucks. If you want to make an article on the subject would help you i work at Pratt&Whitney Canada.

  6. I worked for Andy Granatelli when the turbine vett was built. He showed us a video of it cruising the streets of Los Angeles. It was amazing to see the video. If I remember correctly it had special brakes to keep the speed of the car down to a manageable speed in the city.

  7. I worked at the shop of Dennis Ercek in ’78 who painted the car. I performed the application of the aircraft epoxy substrate and surface prep, which was followed by the pearl silver an black paint laid on by Dennis, the master. Vince was at the shop dialy at times, and drove the finished vehicle to the shop one day when it was finished. The heat from the exhaust was so tremendous, it would melt the paint off the rear bumper, which had to be repaired on occasion. Working on this car first hand and meeting its owner is what makes working at all interesting and fun.

Comments are closed.